Dining Chairs

Measured as width, depth and height, the Bianca is 38 × 46 × 81 cm with a 47 cm seat height, and the Lucia is 49 × 47 × 77 cm with a 45 cm seat height. The Geneva is 51 × 45 × 80 cm with a 50 cm seat height, the Barcia is 55 × 44.5 × 74 cm with a 44 cm seat height, and the Arano armchair is 56 × 53 × 74 cm with a 42 cm seat height. Check the seat height against your table, and bring your measurements to a Son&Bear showroom before you decide.

Every Son&Bear dining chair has a solid wood frame: the Arano, Bianca, Geneva and Lucia in Natural Ash, Natural Oak, Walnut, Dark Walnut or Black, and the Barcia in Walnut or Dark Walnut. The seat comes in Eco-Lux, the wipe-clean coated leather from our Eco-Series, in a woven fabric, or in Velora, whose colour you choose at the showroom. Eco-Lux comes in Beige, Brown or Grey on the Barcia, Geneva and Lucia, in those three plus Black on the Arano, and in Taupe, Cream, Greige, Tan or Stone on the Bianca. The woven fabric comes in Beige or Grey, or in Light Grey or Grey on the Bianca.

Yes, if you choose the Eco-Lux seat, which is offered on all five chairs. Eco-Lux is one of our three Eco-Series leathers, with Eco-Tex and Eco-Prime, and these are the only materials we call pet-friendly. It is scratch-resistant and water-resistant, a damp cloth is all the cleaning it needs, and children's everyday marks wipe away. Light everyday marks are still normal wear rather than a defect.

Wipe the wood frame with a barely damp cloth, then dry it, and wipe an Eco-Lux seat with a damp cloth. Avoid detergents, bleach, alcohol-based solvents, abrasives and other harsh cleaners, because our warranty does not cover damage caused by them, and keep the chairs out of direct sunlight. Solid wood is a natural material, so its grain and colour vary from chair to chair, and its tone shifts a little as it ages.

Son&Bear dining chairs carry a one-year limited warranty that covers manufacturing defects in materials and workmanship. It does not cover normal wear and tear, such as scratches, dents, watermarks and food stains, damage from misuse or harsh cleaning agents, or wood moving naturally with humidity. The full terms are on our warranty page.

Our Singapore showroom is at 8 Ubi Road 2, Zervex #01-07/08, open from 11am to 8pm every day, with parking right outside and Tai Seng, Ubi and MacPherson MRT stations nearby. Walk in without an appointment, try the chairs with wood and seat samples in hand, and bring your measurements so our team can help you work out what fits. To check which chairs are on the floor, message us before you come. Pets are welcome too.